Tap Tap to Zoom
Code: 2SY-PTR-PLYFWD-100-024
MPN: 100-024
UPC: 856008005017
The Apex Polymer Forward Set Sear and Trigger Kit features a solid polymer trigger body, with center pivoting safety. This kit will set the trigger break point farther forward than the factory trigger assembly as well as, significantly reduce the uptake and over travel. It produces a trigger pull very similar to that of a 1911 but in a polymer frame striker-fired pistol. The Polymer Forward Set Sear & Trigger Kit for S&W M&P boasts a smooth trigger pull throughout the break. The rounded trigger face provides the user with a comfortable surface for the firing finger. The kit comes with two (2) trigger return springs; one designed to produce approximately a 4.0 lbs trigger pull (silver spring), and one to produce a 5.0 lbs trigger pull (green spring). These two options give the end user the ability to customize their trigger pull for their specific needs. Expected Results - Reduced trigger pre-travel and over travel to produce a feel similar to a single action fire control system - Overall reduction in trigger travel is approximately 50% - A smooth trigger pull all the way through to the break - Reduced reset - Center mounted pivoting safety maintains factory safety values - 4.0 lbs (silver spring) or 5.0 lbs (green spring) trigger pull weight, depending on which trigger return spring is installed *This kit REQUIRES the use of the larger 1/8 inch sear spring and plunger set up. If your Smith and Wesson M&P has a 1/16th inch diameter sear plunger and spring, we strongly advise you upgrade to a new style sear housing block before installing this product. All function and reliability testing was done with a 1/8 inch sear plunger and spring, therefore we cannot guarantee proper function without the appropriate size sear plunger and spring.
Manufacturer: | Apex Tactical Specialties |
Fabric/Material: | Polymer |
Gun Model: | Smith & Wesson M&P except M&P M2.0 |
Condition: | New |